Angle Scribe - This practical tool is used wherever paving stones,

tiles or other slabs need to be fitted to the millimeter.

With this sturdy, handy special tool (weight approx. 1.5 LBS),
the laying of the edges can be carried out quickly and accurately.
The length and the cutting angle are detected quickly,
fixed by eccentric lever and can be transmitted immediately.

Advantages:

• Stable design
• Fast and accurate working
• Easy operation

BL1300 - Great for Step Treads, Concrete and Granite Curbs.

Easy to Set with Two Locking Bolts

Technical Data:

• Adjusts: 2-23"
• Clamp Weight: 73lbs
• Lifting Capacity:  1300lbs

Hammer Adjuster - A long handle with two rubber pads to align your bond lines.  This hammer can be placed upright to eliminate bending.  

Technical Data:

• Length:  31.50"
• Weight: 7lbs

Hammer Adjuster Replacement Rubber available.

High Flow 1500P - Picks Porous and Non-Porous Products up to 3,300 pounds. 

The highly compact dimensions of the Vacu-Magnet means that it can be fitted to any carrier machine. The Vacu-Magnet performs weightless, exact and economical paver laying for Granite, Bluestone, Wet Cast & Dry Cast.

A range of suction pads are available - call for details.  

Advantages

• Flexible deployment
• Simple operation
• Quick amortization
• Healthy working practices
• Motivated workers

Equipped with 2 adjustable handles and a set of wheels for mobility to and from the work area.  Pads are easy to change out.  

Technical Data:

• Engine:  Honda GX270
• Lifting Capacity: 3,300 lbs

Features:

• 2 Adjustable Handles
• Pressure Gauge
• Eye Bolt for machine lifting

Pad Sizes Available:

• HF1500 Pad 20.5"x12.5"
• HF200E Pad 32"x24.5"
• Additional Pad Sizes Available - Please call 860-870-8665

High Flow 200E - Picks Porous and Non-Porous Products up to 440lbs

Equip with 2 adjustable handles. Can be attached to any carrier vehicle quickly and easily.  The pads are easy to change out.  

Technical Data:

• Drive:  Electric 110V - Draws 12.54 Amps.
• Lifting Capacity w. largest pad:  440lbs
• Weight: 41lbs

Features:

• 2 Adjustable Handles
• Pressure Gauge
• Eye Bolt for machine lifting

Pad Sizes Available:

• HF200E Pad 12x15.75" Lifting capacity:  209 lbs
• HF200E Pad 12x24" Lifting capacity:  330 lbs
• HF200E Pad 15.75"x24" Lifting capacity:  440 lbs

Accessories:

• Frame for HF200E

IMPORTANT:  Do not leave 200E unit suctioned for more than 30 seconds at a time.

See drop down menu in cart to select pad size with unit

Joint Adjuster - Aligns the joint pattern without kneeling.  The joint adjuster features a replaceable blade made out of special hardened spring steel.  

Technical Data:

• Length: 39"
• Weight: 5lbs

Replacement Blades:  Joint Adjuster Blades

Joint Cleaner - Specially designed for cleaning respectively renovation of paved surfaces.  Simple blowing out of joint-material via compressed air.  

• 10-Jet Joint Cleaner
• Without Water Use
• Integrated Splash Protection on the device
• Evenly evacuates the Joint

Technical Data:

• Stainless Steel Housing
• Dimensions: 30" x 14" x 4"
• Weight:  55 lbs

Optimas Maxi-Screed

The stable and well-designed construction permits easy laying of the various materials.

With its simple operation, high efficiency and comparatively low cost, the Optimas Maxi Screed belongs on every job site. Its bucket shape and pulling points have been designed to enable a light-weight design which will never lift off the screed rails when screeding. The continuously-adjustable modular design of the screed set makes it the innovative alternative to the telescope principle, which has never convinced in practice. This flexible system can screed up to 19 Feet and can be modified with additional pieces to screed up to 24.6 Feet. 

Use with included screed rails.  Includes Rails: (12) 13.12ft (4) 6.56ft (4) 3.28ft       Total of 196.85 Feet (60m)

Advantages:

• Maximum screeding area 19 Feet (5.9m) additional pieces can be purchased to screed up to 24.6ft (7.5m)
• Continuous height adjustment with scaling on both sides
  
• Articulated side flaps make for clean leveling up to the edge
• “Bucket design” makes for a large holding capacity
• Its bucket shape and pulling points have been designed to enable a light-weight design which does not lift up when drawn.
• Quick and easy change and fitting of various intermediate parts.
• Hardened and sharpened spring steel blade cuts through hard packed material
• Modular design saves space during transport and storage
• Flexible use on a range of small and large construction sites for coarse and fine screeding
  
• (e.g. paths, residential roads, parking, industrial premises, harbor projects)

Maxi Square - An Angle Guide that folds for easy transportation.  Great for control of 90° and 45° angles.  Long leg length warrants accurate work. 

Technical Data:

Dimensions: 6' x 6' x 8.5'

Weight: 14.77 lbs

Mini Joint Filler - Designed for smaller job sites to completely fill joints in one pass.  A completely filled joint is able to transmit forces from one paving stone to another and prevent the paving stones from being displayed, thus keeping the paver surface elastic.  "Mini" in the true sense of the word...for transportation and storage folds down to a small pack.  

Two rotating brush-crosses generate a slurry of sand and water allowing joints to be filled completely in one go.  Easy to use.  Seamless filling of joints without gaps on adjoining wall etc. Perfect Job!  Simple height adjustment to bring brushes into correct position for pushing in the sand. 

Benefits:

• High Quality Finished Paver Surface
• No Additional Rework
• Fast, Cost-Effective
• Effortless Joint Filling
• Able to be used with or without water

Technical Data:

• Motor:  Honda GXV160
• Water Supply:  External Hose Pipe by adjustable valve

Dimensions: 

• Width: 4' 
• Depth:  29"
• Height Operation:  38"
• Height Transport:  23"
• Weight:  150lbs

6'7" Additional Mini Screed Special Additional Length Attachment.

Must have The Wheels with Flaps before purchasing.