BL450 block clamp picks up to 450 pounds of wall block, step treads and more including irregular steps
Quick-E-BL 450 Block Clamp
BL450 block clamp picks up to 450 pounds of wall block, step treads and more including irregular steps
BL-450 Setting Multiple Cell Retaining Wall Blocks
Excavator Using BL 450 Block Clamp
Quick-E-BL 450
Spec sheet for BL-450

Quick-E-BL 450

Item# NT021

Regular price $746.95 USD

The Quick-E-Block Clamp can grab multiple blocks from your pallets just as they are delivered to the job site. 

Scroll Down to View Videos Please

A 3-man crew with no Geo-Grid can install about 300 - 500 sf of wall block a day.

Pairs well with: Quick-E-Adjustable Chain

Quick-E-BL 450 Reinforced Replacement Pads Available.

Wedge sold Separately.  

Clamp Item# Adjusts Machine/Hand Latching Clamp Weight Weight Rating
BL 3000 NT031 5"-53.5" Machine Self-Locking 200 Pounds 3,000 Pounds
BL 1300 52318 2"-23" Machine Auto-Latching 73 Pounds 1,300 Pounds
BL 980 NT042 0"-38" Machine Manual-Latching 72 Pounds 980 Pounds
    BL 980 Accessories
      Boulder Grab NT042b 0"-38" Machine Manual-Latching 124.5 Pounds 980 Pounds
         I-Spacer NT046 11" Long
          Wedge NT047
BL 850 NT083 0"-16.5" Machine Auto-Latching 55 Pounds 850 Pounds
BL 450 NT021 31"-51" Machine Auto-Latching 42 Pounds 450 Pounds
    BL 450 Accessories
    Multi Block Clamp NT033 Machine Auto-Latching 1,200 Pounds
          Wedge NT047
BL 180 NT022 7"-18" Machine/ Hand Self-Locking 9 Pounds 180 Pounds
BL 100 NT071 3 Adjust. notches Hand Self-Latching 4 Pounds 100 Pounds

 

  

INSTRUCTIONS:  Use the Quick-E-Block Clamp by pulling the bottom pin to adjust to the clamp width. The coupler is held in place with a second pin - it should be centered between the two clamping pads. Hook a rated chain, cable or strap to your machine and the clamp. You’re now ready to lay block with minimal effort! Quickly pick up on the chain manually or with your bucket to clamp the block. Set the block about 6” from the those last laid then pick up slowly on the chain to pick the clamp off the block. Now simply slide the blocks into place. When laying multiple cells with tapered sides, one block will be reversed. Simply spin the block around and slide it into place. You’re never lifting the block - just slide it.
NOTE: A hard hat should be worn at all times. Stay out of the swing zone and never get under the clamped block.