Use with Quick-E-Hybrid HD Edging for all open and permeable grade base applications. Hammer in HD Hybrid Stake every other slot, 5 Stakes per 6.66' length
Great for walkway, patio, driveway and commercial applications.
1 - 30 pc. bundle = 1 boxes of stakes
For ease of installation use with the Quick-E-Hammer (Sold Separately)
V-shape design strongly locks into the base
Prevents lateral shift
10'' steel stake
How many stakes will I need for 200 linear ft? 150 Stakes
Ask your Dealer Today or see our Dealer Locator at the Top of our Website for Edging! The Best Way to SAVE SAVE SAVE! If there is no dealer in your area - Give us a Call 860-870-8665.
390 piece pallet (1/2 Pallet)
780 piece pallet (Full Pallet)
** Don't Forget to Order your Stakes for Open Grade/Permeable Solutions
Use Quick-E-Sand Plow to perfectly remove bedding layer for edge restraint.
One of the biggest reasons a project fails is an improperly installed edge restraint (PVC or aluminum edging).
Scroll Down to View Videos Please
If your edging does not sit down tight on your compacted gravel base, the sand will migrate out and cause your edge to lose all stability. Thus causing the installation to fail.
The Quick-E-Sand Plow:
Helps prevent edge restraint failure
Pull the sand away from the paver edge to create a perfect setting bed for edging
INSTRUCTIONS: To use the Quick-E-Sand Plow simply loosen the two large black knobs and slide the plate up or down until the desired paver height (in millimeters) is lined up with the top of the plate. By doing this, you will automatically be set to the correct height if you are using 1" screed pipes. Once set, firmly drag the Quick-E-Sand Plow along the edge of your paver surface to plow the sand away and expose the compacted gravel below. This prepares a perfect base on which the PVC edging is to rest and get spiked into. Be sure to keep the plow firmly against the paver edge at all times. Calibrated for depths from 2-3/4" to 6" (7 cm to 15 cm).
Quick-E-Hammer
Item# NT003
Regular price
$106.95 USD
Designed to rapidly install steel spikes/stakes in your Hybrid HD Edging.
Install spikes or stakes into edging
Proven to decrease workman's comp claims due to smashed fingers & hands
Alleviates tennis elbow, carpal tunnel, and fatigue
The countersink design allows a 10" spike to be installed without causing the little bounce that loosens the spike & causes edging to fail
Hammer drill MUST BE "SDS MAX" (hammer drill not included) - See below for SDS Max Video Explanations
Recommended Hammer drill specs:
At least 8.1 ft. lbs of impact
At least 13 amp motor
INSTRUCTIONS:
To use, align the nail attachment with the top of the spike and push the power button to insert the spike.